Thursday, 26 October 2023

Flipping Chassis

Having decided to use my existing chassis on the GT6 and effect some adjustments to it, I flipped the galvanised, Mk2 GT6 chassis I bought earlier in the year. 


I had bought it for £350 and had it on Facebook Market for £400, fully expecting to be beaten down to £350, which meant I got my money back. As it transpired, a bloke no more than 10 miles away offered me the asking price, plus £20 for delivering it.

He was busy rebuilding a Jaguar XJS, a 1960s Sunbeam Alpine and a Mk2 GT6. Taking on an XJS is serious stuff, as they were rot boxes from the start and there aren't that many left.

Anyway, we had a brilliant exchange over Messenger, talking about tools and cars, so I decided to let him have it for £350, forgetting it had cost me £50 odd in fuel to collect it from Preston. However, a deal is a deal and he was appreciative.


Wednesday, 25 October 2023

DIY Sandblaster Experiment

Thought I'd have a go at making a small, DIY sandblaster from a plastic bottle and an air blow gun.


The bottle needed a large screw top, so I got some Innocent apple juice from Tesco for £4.10, which went on the shopping budget. More than I usually pay, but the plastic cap was perfect. I had previously rummaged through the neighbourhood plastic recycling, which is all put outside our house for ease of access for the recycling waggon, but there was nothing suitable (I usually have a good rummage and it's surprising what people throw away - I've liberated a lot of useful glassware and plastic from the recycling).

I also bought some 2 pack, epoxy putty from B&Q for £7.28 with which to affix the blow gun (which I already had) to the plastic screw cap. I could have used car bodyfiller, but it's not quite the right consistency and is a bit too loose.

I cut a small, finger-width channel into the long nozzle of the blow gun to create a hole through which the sand in the bottle could flow and sealed it to the plastic cap, into which I'd drilled a corresponding hole. I also screwed a couple of screws into the cap to create a key for the epoxy putty.


As you can see from the piece of metal at the top, and the exposed metal on the GT6 bonnet by the scuttle louvres, it's great at removing surface rust from bare metal. However, I tried to remove some of the car paint - and it was next to useless - it cleaned the paint, rather than removing it en masse.

Here's a short video of the result.


So, great for small, fiddly bits of metal, like manifolds or linkages, where the large sandblaster would be overkill, but pretty much useless for everything else. 

Here's a photo of the carbs and inlet manifold, which I gave a short, one minute blast. 


Great where you need fine control and it doesn't send heaps of sand into the air, although a sandblasting cabinet would improve it and enable recycling of the sand.

The concept is sound, but I need to give more consideration to the stability of the bottle of sand and its adhesion to the smooth nozzle of the blow gun, as it's heavy and falls to one side of the gun if you don't hold it upright.

I have two Lidl, hand-held sandblasters, but neither of them work - no blasting media comes out of the nozzles.



Tuesday, 24 October 2023

Policing

Here's an idea - contract out policing to a private organisation. Let's call it the Wagner Group, for want of a better name. Tory MPs could have shares in it.


Staff it with prison inmates, giving them intimidating, black uniforms and thus killing two birds with one stone - reducing the prison population (thereby making room for hordes of lefty lawyers) and rehabilitating inmates.

The only problem I can see is that, as a private organisation, such a force would have the right to strike, so it would be anathema to its Tory shareholders.

I see the Home Secretary, Suella Braverman, wants to upbraid the police for not arresting people chanting the Arabic word Jihad during protests in London. Now Jihad literally means a meritorious struggle or effort. Unfortunately, it has become associated in the West specifically with terrorism. 

However, if you 'cancel' the word Jihad, then for the same reason you must 'cancel' the word Crusade, even if used to denote a vigorous campaign for political or social change. This is due to it, unfortunately, being associated within Islam with a murderous rampage against Muslims (and a few Jews and Christians who happened to get in the way of medieval crusaders attempting to reclaim a certain flashpoint in the Middle East for Christendom).

I wonder what the protectors of free screech will have to say? No, that wasn't a typo.


Monday, 23 October 2023

Valance II

 Thought I'd try fitting the valance yesterday, following a lot of grinding.


There's a finisher strip that goes over (or under, to be precise) the join between the outer wing, inner wing and the end of the valance to form a nice edge. I was going to remove the one on the left hand side, but it's welded on at the ends and spot welded in the middle, making it rather difficult to remove. Also, it was in remarkably good condition, so I left it in place, but ground it down a bit on the inside. 

The right hand side, requiring more in the way of replacement panels, doesn't have a finisher anyway, but I do have one to apply when I've finished putting everything in place. That said, those who have rebuilt GT6s previously recommend leaving it off completely, as it can become a rust trap. Given I've retained the left hand one, I'll have to fit the right hand, ensuring I seal it with something like the dreaded epoxy resin.

The left hand side is perfection, but the right hand side leaves a lot to be desired, primarily because the boot floor has sagged a bit due to the whole area having been taken apart. This was corrected by attaching the engine hoist to the boot floor and raising it a bit, but it's still not perfect. A couple of trolley jacks are needed.

After getting the left hand side sorted, I realised I hadn't sanded down the lips where the spot welds will go, meaning I wouldn't be able to establish a circuit - so the whole lot came off again.

Got it back together and realised I hadn't primed the lips with weld-through Primer. Bugger that, I thought.

More adjustment is required before I commit to the spot welder, although I could weld up the left hand side, which would allow some bashing on the right hand side to ensure a good fit, without a risk of destabilising the whole lot. I really need the B post pillar section for the driver side before closing everything up, but that's not arriving till tomorrow.

I also think I need a 2nd opinion from my neighbour, who rebuilt a TR6 a couple of decades ago.

Watch this space, but probably not till next weekend.


Sunday, 22 October 2023

Who Shot Liberty Valance

Repair panels arrived Friday and I immediately realised I'd bought a left hand B post pillar repair section, rather than the right hand. Phoned Rimmer Brothers in Leicester and immediately corrected the error, but it will be Tuesday before the correct panel arrives.

The rear, lower valance, however, was perfect. On Saturday I used a grinder, nibbler and sabre saw to remove the old valance.




Roughly fitted the new one to see how it looked.

There are so many spot welds, and they're not easy to see, that I didn't even try to drill them out. It's going to take a lot of patient grinding to get back to the metal I need to weld the repair section to. While spot welding will work on the upper and lateral sides, the lower side will have to be plug welded, as it's impossible to get the spot welder in there.

The brilliant thing about rebuilding your own car is that you can spend as much time as needed to get something right without worrying about the cost. I can roll the car out of the garage and spot a tiny blemish and then spend all day getting rid of it, enjoying the activity.


Saturday, 21 October 2023

Geneva Gimmick

Is the Geneva Convention worth the paper it's written on?


A Convention, in international relations, is defined as an agreement between states covering particular matters, especially one less formal than a treaty.

The convention imposes ethics and morals on combatants, which is all well and good, until a conflict becomes existential for one party or the other and a breach is a necessity, being the only possible way of avoiding utter destruction. In a fight, you'll do what's needed to win if you're losing, and untying the hand that's tied behind your back might make the difference between winning or destruction.

Then there's the fact large, powerful nations get away with breaches of the Convention all the time. It's impossible to enforce the consequences against the likes of the USA, for example, which has flagrantly flouted the Convention numerous times since it came into operation. Similarly, Russia has breached the Convention. It can therefore be said that it's only for the smaller countries - a bit like taxes, which the average person can't escape, but the rich can avoid due to their power and influence.

The USA, Russia, China, India, Israel and Sudan do not even recognise the ICC, which prosecutes War Crimes. One wonders why?

The bombing of Dresden in WWII is a prima facie breach of the Convention (contrary to popular belief, there was a version before the 1949 one, which the USA, UK and Germany had signed). However, some argue that Dresden was a legitimate, industrial target and civilians were not the target.

Similarly, dropping the atom bomb on Hiroshima can be argued as both a breach and a mechanism for saving even more civilian lives had there been a land invasion of Japan. Interpretation can be very subjective, as in many matters of law. It has been called the Geneva Suggestion, the Geneva To Do List, the Geneva Opinion and the Geneva Recommendations.

Not only is the Convention applicable only to smaller countries, but also to the side that totally beaten into submission. 


Friday, 20 October 2023

No Crackers, Gromit

My replacement sandblaster nozzle arrive yesterday and I immediately sussed the problem with the old one - a rubber packing ring / grommet was missing, meaning the ceramic head wasn't pushed out far enough to create a proper seal when the trigger was released.



No wonder it was almost impossible to keep the pressure at where it should be. It's probably the reason why the previous owner sold it - he never noticed.

OK, so it cost me £19.99 for a complete nozzle I didn't really need, but I dare say replacement ceramic heads don't come with a rubber packing and they're sold separately, meaning I'd still have been at a loss if I'd simply ordered replacement ceramic heads.

However, it still doesn't do the job as I expected, which I think in due to the 8 bar, 15cfm compressor not being able to keep up with it (although 15cfm is recommended). Once the sandblaster tank is pressurised, I can get about 10 seconds of blasting before I have to stop and wait for the tank to get back up to pressure. To do it properly I'd need a compressor the size of the workshop.


It's fine for blasting fiddly bits where the wire wheel can't get into, but for large, flat areas, the wire wheel on a grinder is much faster and efficient. I used it on the door jambs, hinges and skin seams.






At least I've finished the passenger door and primed it. I didn't bother stripping the inside of the door, as it's sound as a bell and will be permanently covered by a trim panel anyway.

I've also ordered the last couple of remaining body panels I need - rear valance and driver side door closing pane - which should arrive today. Other repair panels are required for the bonnet, but that's at a later stage and doesn't affect the tub.


Thursday, 19 October 2023

The Power in the People

I've been reading the above named book by Michael Mansfield, the famous barrister who has featured in many high profile human rights trials, and it's pertinent with the news that Greta Thunberg has been arrested.

It's primarily about how people coming together and persisting, in the face of government obstruction, can effect lasting change in the pursuit of truth, accountability, fairness and justice.


Some sentences stand out. In the first he's talking out the Stephen Lawrence murder:

"This year — 2023 — marked the 30th anniversary of the murder. The memorial was held at St Martin-in-the-Fields in Central London, just like previous memorials. The last memorial was supposed to be the final one. Doreen did not want to have to convene another. But the spectacle of gross misconduct by police and those in government over the recent past compelled her to take up the baton again. Once more, she brought together those in power to face the force of the people. The new Commissioner of the Met sat alongside Doreen and Stuart. The leader the opposition, Sir Keir Starmer, and Mayor of London, Sadiq Khan, were just across the aisle. There was a space reserved for the Prime Minister, Rishi Sunak, who was due to read from Nelson Mandela’s Long Walk to Freedom. But he did not appear, nor did he appoint a colleague to take his place, nor was any message conveyed to the congregation, nor to the public. But perhaps that was the message."

And here he talks of the government's plans to leave the ECHR:

"It will come as no surprise that there has been a growing cohort of reactionary ‘people in power’. Their objective is to override the ECHR or even withdraw from it, to ignore decisions made by the European Court of Human Rights (for example on the issue of small boats carrying immigrants) and ultimately to construct an alternative British Bill of Rights, foreshadowed in June 2022. It will also come as no surprise that the purpose of these moves is not about the people at all but about control and, above all, power. Ironically, ‘human rights’ are being demeaned as part of the derogatory ‘woke’ culture by those in power, many of whom are themselves clothed in sleaze. The ‘people’ are viewed as a threat, and that takes us right back to what is at stake — truth, accountability, fairness and justice."

Essentially he says that right wing populists are afraid of the people once they see through their lies and want to curtail their right to protest against the government, under whatever pretext they can find. He goes on to say they can deal with the odd rebel, but not the many. 

He quotes the poet Shelley, who said, in support of the people in the wake of the Peterloo Massacre; "Ye are many - they are few." Laws are not immutable and there have been many bad laws.


Wednesday, 18 October 2023

2 State Solution and Topology

I wrote the other day about the 2 State Solution.

What we in effect have at this moment is a 3 State Solution; Israel, the West Bank under the PLO (Fatah) and Gaza under the dictatorship of Hamas (not having had elections since 2006, they are definitively a dictatorial regime).


A 2 State Solution, where a contiguous Israeli state sits alongside a contiguous Palestinian state, would resolve many of the problems - for a start, a single, contiguous Palestinian state could mean the end of Hamas as a dominant force, as the number of Palestinians supporting Fatah far outweigh the Hamas supporters and Israel finds the PLO a lot easier to deal with.

A 1 State Solution would be even better, as there are already Arab Israelis; however, they are 2nd class citizens and have to be in order to ensure that there is a homeland for the Jews where they are not democratically outnumbered. For Israelis that's a necessity born of history and experience as well as being supported in international agreements. Currently, there are more than 50 Israeli laws which discriminate against Palestinian citizens of Israel in all areas of life, including their rights to political participation, access to land, education, state budget resources, and criminal procedures.

However, a 2 State Solution as described above cannot be achieved without some topological jiggery-pokery and the migration of a sizeable proportion of one population or the other. Joining Gaza and the West Bank (or what's left of it) by a corridor would necessarily cut the current Israeli state in half, which is strategically untenable (yet that's what happened to Palestine). 

Therein lies the conundrum. The whole problem is caused by topology. In any case, it should be handed to mathematicians to solve, after all, the Bible says; "If you have faith as small as a mustard seed, you can say to this mountain, ‘Move from here to there,’ and it will move. Nothing will be impossible for you.”

Perhaps non-Euclidian space is the answer, or a Mobius Strip?

There again, they could all convert to Christianity as a compromise. Chances are one side would convert to Catholicism and the other to Protestantism and carry on fighting. However, this is in essence a political problem and not a religious one; religion is a secondary attribute. It's a bit like The Troubles where religion was heaped on a political issue. 

Ottomans are giving Hay a problem.



We have two, decorated by Hay's artist sister. She wants to move them, but isn't sure whether to replace them with Israelis or Palestinians.


Tuesday, 17 October 2023

Restore Trust

I'm going to join the right wing, Tufton St funded Restore Trust organisation that's designed to subvert the National Trust and whitewash the nastier aspects of our old landowning aristocracy and capitalists.

Last weekend, we were staying in the motorhome at a fishing lake near Portsmouth, where we were due to go for a school reunion on the Saturday evening. A bit of a ramshackle place, but tranquil.


I thought this sign on the fishing shop on site was a bit unsporting and not exactly concomitant with the ethos of Paul Whitehouse and Bob Mortimer.


While there we thought we'd visit a National Trust property on Saturday and the nearest was a place called Hinton Ampner, not too far from Winchester.



It was only when we drove through the gates that we realised we'd already been there last month when visiting No.2 Son in Winchester. Obviously we're getting old and forgetting where we've been. However, it's a beautiful and comfortable house with gorgeous gardens.





The last couple of photos above is a lovely yew hedge that's been carved into a beautiful, undulating cloud formation.

Anyway, the bloody cafe was closed, so I'm going to join Restore Trust. No more of this slavery and exploitation of the masses left-wing lawyer, BBC, tofu-eating wokery - just get the bloody cafe's open! What on earth do they think people visit NT properties for, if not to be fleeced in the cafe for average, yet exorbitantly priced grub? I shall demand change.

The fact these places were built on the backs of exploited workforces is immaterial now anyway - we own the vast majority of it through the National Trust and are free to tramp all over the houses and gardens of these running dogs of capitalism and the exploitative inheritors of the Norman yoke, where our grandparents toiled for a pittance, rather than be condemned to a short life by working in the owner's desperately unsafe mine or quarry.