Sunday, 5 November 2023

An Unfortunate Juxtaposition

Saw these two headlines on the same news webpage. Admittedly the one on the right was from July, but it was one based on 'similar stories'.


So Cruella is taking on the Royal Family with her divisiveness...

I wonder if she's intentionally making the Conservatives unelectable?


Saturday, 4 November 2023

Performance Farts

I want to talk to you about a serious subject - one which affects everyone as they age. One that delights your children when they're small, but becomes an embarrassment as they become teenagers and adults and makes then want to disown you. That subject is farts.

The older one gets, the more one tends to fart due to gut leakage and a slackening of the sphincter muscles. However, I also think it's because one becomes less self-conscious about farting. 

It seems to coincide with the transition from dressing for style to dressing for comfort and practicality.


I know that in my case it's a case of performance farting. It's both an act of rebellion against convention and a statement or territory marker; however, its use has to be calculated.

Performance farting was a fairground attraction in the 19th century, with performers who could send jets of water long distances. They were flatulists. The most famous, Joseph Pujol, performed at the Moulin Rouge.

I haven't yet been able to form a recognisable tune, but I'm sure I could, with practice. I happen to remember the tunes I played on the bugle in the school military-style band - I could aim for one of those.


Friday, 3 November 2023

Early Christmas Present

Hay needed some new walking boots, so we went to WH Thomas & Son in Wotton Under Edge yesterday, the best shop in 100 miles for excellent priced walking gear, workwear and the kind of stuff you could get in Rawcliffe's in the 60s and 70s - gentlemen's jeans, flat caps and all manner of farmer regalia.

I was having a mooch around and found some beautiful, Black Yak, brushed cotton dressing gowns that are handmade in Nepal. 


Very long, all-embracing and with a hood - perfect for winter. Not only that, but WH Thomas sell them for £35, which is a fiver cheaper than Black Yak sell them on their own website. 


I was ecstatic about them, so Hay got me one for Christmas. Absolutely love it - there's something Qui-Gon Jinn about it. Need to look for a lightsaber next.

As an aside, have you noticed that it's a lightsaber (American spelling) and not a lightsabre (English spelling)?

These are not the droids you're looking for, by the way.


Thursday, 2 November 2023

What's in a Name?

Storm CiarĂ¡n!


There's a battle on amongst TV presenters as to how it's pronounced. One presenter says Keer-an and another says Keer-on, although the consensus seems to be moving toward Keer-on.

Any Irish readers out there who can settle the question?


Wednesday, 1 November 2023

Some Lessons from Gaza

Here are a few things I've observed or learned over the last 3 weeks, plus a few universal thruths.

One's reaction to murder is inversely proportional to the distance from which that murder is perpetrated. Close quarters murder viscerally affects us more than aerial bombing or missile strikes. 


Accepted collateral damage to unarmed civilians will be higher for enemy civilians than your own civilians, unless you're a member of Hamas, in which case you don't care about your own civilians anyway, as they're no more than a means to an end. 

It would appear to be counterproductive to use actions against those one seeks to destroy that function as a recruiting sergeant among those suffering collateral damage, especially given the average age of the Gazan population. 

So long as there is no solution to the Palestinian problem, terrorism will be exported to the West. It is therefore in the West's interests to promote a solution that gives Palestinians national sovereignty. 

As a conflict becomes existential, morals and ethics will necessarily recede into the background - both sides see it as existential, although Israel is unlikely to disappear, as it has US support. 

While the Gaza conflict has essentially been political, and one where Israel lost the moral high ground through state-sponsored illegal settler activity and refusal to define a 2 State Solution border, it's in Israel's natural, strategic interests to portray it as religious by invoking anti-Semitism and the Holocaust whenever it can, thus taking advantage of collective, Western guilt to garner support for retaliatory overreach. 

 One can therefore expect a concerted effort by the Israeli government to amplify anti-Semitism where it can (or even invent it, in the case of Antonio Guterres). The words of many Israeli government spokespersons to date support this willingness to see everything anti-Israel as anti-Semitic, regardless of the objective intention. There is great danger of the Israeli government taking this too far and it rebounding on them.

Iran's covert actions, by infiltrating pro-Palestinian demonstrations, actually assists Israel with this strategy. 

It is not Islamophobic to detest Hamas for the murder of Israelis. It is not anti-Semitic to detest Netanyahu’s government for its treatment of Palestinians. It is Islamophobic or anti-Semitic to attack Muslims or Jews in general for the actions of Hamas or Netanyahu’s government. 

Even-handed and unbiased reporting will be seen as biased by the opposing sides, much like the BBC comes under fire from both the far left and the far right for being biased toward the other side. When both sides attack a media outlet for being biased, the truth is that its reportage actually lies in the middle.

This conflict is being waged on the internet, as much as it is on the ground. People should be wary of repeating political slogans or images in respect of this conflict, as they are double-edged swords.

People should also be wary of committing firmly to one side or the other when both sides have serious questions to answer.


Tuesday, 31 October 2023

Air Source Heat Pump

Not having used the Air Source Heat Pump this summer, except for the odd day, I've been able work out its power usage. Cost, with the varying price of electricity is rather more difficult to ascertain.


Click to enlarge the chart. Orange is usage and blue is generated from the solar PV - all in kWh.

Last summer, I was using around 10 kWh on a daily basis. This summer it's been around 4 kWh, with the only difference being the use of the ASHP. So that's some 6 kWh attributable to the ASHP, but that does not allow for the fact we have solar thermal, which reduces the load on the ASHP when it's sunny.

Not allowing for the solar thermal boost, at current prices, that equates today to £2.26 a day for domestic hot water during summer - more if you don't have solar thermal. I have no idea how that compares to a gas boiler, as we don't have one.

I can't work out the winter cost, as the underfloor heating massively skewed the figures last year and I have to wait to see this year's winter trend (sans underfloor heating) before I can arrive at a figure.


Monday, 30 October 2023

10 Pin Bowling Ball

Hay took a surreptitious photo of my bonce when I was reading on the settee. She maintains I was sleeping - I was merely feigning sleep as part of a cuning plan.


You can see where the holes I had drilled into my head (following a bilateral, subdural haematoma after a bike accident, my bonce having hit the floor rather hard) have resulted in the hair turning darker. You can just make them out as four darker patches. It looks a bit like a bowling ball.

If I had holes all over my skull, perhaps I wouldn't be grey. It's possible I've stumbled on an anti-ageing secret!

I told Hay that when I kick the bucket she can use my skull as a candle holder.


Sunday, 29 October 2023

Drone Disaster

On Friday I went to the Somerset Monument in Hawkesbury to take a few shots using No.1 Son's drone. However, I was a bit over-cautious, as I didn't want to fly the damned thing into the trees surrounding it and losing the drone. I any case, the MP4 file was corrupted, so I didn't manage to get any footage.


The monument commemorates one of the Somersets' kids, who was a 19th Century soldier and MP for South Glos. 

Duke of Beaufort was created by Charles II in 1682 for Henry Somerset, 3rd Marquess of Worcester, a descendant of Charles Somerset, 1st Earl of Worcester, legitimised son of Henry Beaufort, 3rd Duke of Somerset, a Lancastrian leader in the Wars of the Roses. The name Beaufort refers to a castle in Champagne, France (now Montmorency-Beaufort). It is the only current dukedom to take its name from a place outside the British Isles.

So the Dukes of Beaufort took the surname Somerset, while the Dukes of Somerset retained the surname Beaufort. Consusing, isn't it? The Dukes of Beaufort live nearby at Badminton Estate. As an aside, Fitzroy Somerset, the 9th and youngest son of the 5th Duke of Somerset, was in charge of the British forces in the Crimean War and was responsible for the debacle of the Charge of the Light Brigade. He was known as Baron Raglan following his appointment Master General of the Ordnance, Raglan being one of the castles in the Beaufort's huge estates in Wales. He also served with Wellington during the Peninsular War and at the Battle of Waterloo.

On Saturday I took No.1 Son so he could take the risk of the trees. He managed to get some good footage but, unfortunately, he flew the drone into a tree at the end and it stuck nearly half way up. You can just make it out in the photo below.



While he was climbing the tree to retrieve the drone, a bloke came out of the lodge next door and asked me to move No.1 Son's car, as it was blocking a farm gate (although there was enough room to get a bloody bus past it and I doubt one tractor a month passes through the gate). 

Bugger!I hadn't realised No.1 Son had left the drone box on the top of the car, and it fell off and all the bits fell out. The car went over the spare battery and a few other bits. He wasn't best pleased with me, but at least I hadn't navigated his drone into a tree.

Here's the footage No.1 Son got, right to where it hit the tree.

Earlier in the week I'd gone to Dyrham House, about 15 minutes away, to try and recreate the closing scene of The Remains of the Day, where the camera flies away and up from the front facade. Dyrham House is a National Trust property that was used for the exterior shots in the film (and many other films). I approached the house from the rear in Dyrham village and didn't crash it into a tree!

Here's the actual final scene from The Remains of the Day, where Mr Stevens (Anthony Hopkins) releases a pigeon, which had flown down the chimney, through a front window. The pan-back starts at 1 minute, exactly. It's very shaky - there probably wasn't stabilised drone technology in 1993.

Grand houses abound in this part of the country - Dyrham, Badminton (Dukes of Beaufort), Highgrove (Prince William), Gatcombe (Princess Anne) and Doddington (James Dyson). There are probably a few more I've forgotten. 


Saturday, 28 October 2023

In the News

Saw this headline.


Not sure when this is planned to happen, but I hope it's not when a Conservative government is in charge. Like HS2, they'll cancel it when the astronauts are up there, citing cost overruns. 

Also heard that proven liar, Boris Johnson, is to join GB News as a presenter. A match made in heaven. 


He said; "Great opportunities lie ahead." Lie ahead? He lied in the past too!

Meanswhile, the government, in a display of evidence-free ideology, tells local authorities to stop trials of a 4 day working week.


Businesses that have implemented a 4 day week report a better work/life balance and no fall off in productivity. So why not al least allow trials that will provide definitive evidence one way of the other?


Friday, 27 October 2023

Valance MkIII & Beyond

A long one....

The replacement B post panel was due to arrive Monday, but the bastards at Evri sent me a message to say I wasn't in and they didn't deliver for that reason. I was in all bloody day!

Started spot welding the valance into position. There was some carving to be done on the left hand finishing strip before I could get the left hand side to fit but, given there was nothing else that had been removed, it was relatively simple. I then ran along the seams with the spot welder. Some tacks with the MiG welder were required, just to ensure the panel adhered to the inside of the finisher that runs under the left hand outer wing.


Next came the right hand side, which was an absolute mare. It necessitated the boot floor to be raised with the engine hoist in order to align it with the correct position to attach to the inner wing, and a webbing strap to pull the inner wing in so it met the boot floor. Lots of torsion has been incorporated, which shouldn't be there, although my spirit level suggests the boot floor is now level.


I shouldn't have been in such a hurry to fit the outer wing, which hindered my ability to properly line things up on the inside of the car - although I wasn't to know there were alignment problems on the inside. There was some serious misalignment between the flanges on the lower valance repair panel and the inner wing, although the alignment with the upper valance is perfect.

The inner wing was fitted by the previous owner and wasn't in the correct position, which is probably why I had issues fitting the outer wing. However, there was nothing I could do about it, so any adjustment had to be effected on the lower valance repair panel. Not ideal and left me with the repair panel flange, which should be spot welded to the inner and outer wings, standing proud and requiring tack welds with the MiG on the inside and outside, with the excess being ground off.



You can see in the above photo how much had to be ground off the valance's right hand flange. At least there was no gap, which allowed me to weld it up on the inside.

Not any noticeable difference when viewed from behind and the valance looks level all the way along, whereas the old one sagged on the right.


There's a very small, triangular gap where the upper valance meets the lower valance and the rear wing ( a 3 panel join), occasioned by the misalignment. I'll probably have to fabricate a triangular fillet for it.

Then the B post closing panel arrived by courier on Tuesday and I realised, once more, that it was a mistake to fit the wing first, as a flange on the B post panel has to go under the wing flange. Luckily, the wing wasn't welded along the bottom, so it could be pulled out a bit, but the B post panel needed some cropping where it meets the sill to give me room to manoeuvre it into position.


The brass screw was inserted so I could pull the bottom of the B post panel up, under the sill. The wing was slightly proud from the sill, so I needed a huge G clamp to encourage it into position before I proceed with plug welds around the flanges. 


The part where it joins the sill step was tricky and I had to use a mixture of MiG and stick welding to blob the metal on and build it up without blowing a hole in either the sill or the B post. There was a small square area of missing metal where I had to crop the panel to get it into position. I managed to insert a tiny fillet using the good steel from the old valance and finished it with filler. It looked a right mess, but I persevered with the blobbing and grinding, but after the filler and primer it ended up looking like this.

The door fits, so success.


The other side looks fair too, bearing in mind that the doors are only loosely fitted and the hinges aren't on. so the gaps aren't true.


I then decided to tackle with wheel arches of the new rear wing. The spot welder wouldn't go near it because of the rebate, so I dug out the spot welder adaptor for the stick welder, which attacks the problem from one side only - and it was virtually useless, as it either didn't penetrate the inner arch at all, or simply blew a hole in the outer wing wheel arch flange. I guess I could get the spot welder to fit if I get some more copper rod and make some weird shaped electrodes.

Resorted to the MiG, combined with some stick welding, filling the holes the spot adapter had conveniently blown for me, eliminating the need to drill holes. Still not happy with the result, as welding upwards is problematic because gravity dictates that the weld pool drops to the floor, leaving holes. I'll probably return to the wheel arches today and cogitate on the problem. Doubtless I'll find a solution, but it may involve a rotisserie to turn the car over to counter gravity. 

Putting a magnet the top side of the weld won't work, as the Curie temperature of steel (the temperature above which it loses any magnetic properties) is around 700 degrees C, and welding takes place at several thousand degrees.

Once the wheel arches are done, I'll be in a position to remove the tub from the chassis. That's when my problems start - I don't have the space to store them separately. I need a garage extension.....

I'll probably start work on the bonnet next, but that will have to wait until I have recouped some funds for the necessary panels, although stripping it and cutting out the rot can be done without spending anything.

The problems I've had are a consequence of having to contend with previous, inexpert work (not that I'm an expert, but I have done this type of thing before). My unfamiliarity with the GT6 and not having taken it apart myself in the first place didn't help. The golden rule is to replace in the same sequence in which you removed panels and not to try to take shortcuts. 

It would have been much easier to do this work with the tub off the chassis and on a rotisserie, but it's said that if you replace panels with the tub off the car, you'll never get it back on the chassis again as nothing lines up with the bolts, and I can see why.

As an aside, Hay's works is having their Christmas do in Ampney Crucis. I told her my works do is in the garage.