Friday, 6 October 2023

Flat, I Say, Flat

I have a favourite barber in Chipping Sodbury, but I think I'm going to have to change to someone else.

The owner seems to understand what I want when I say I want a No.3 on the back and sides and the top flat; however, he has a young assistant who, even though I show him photos, insists on putting a dome across the top of my hair.

Here are the photos I show him in an attempt to get through to him:



Fairly plain and instructive, if a bit extreme in the last case - yes? Yet I still get this - a perfect dome:


Sure, there's not a lot to play with, but give it a couple of weeks and I can turn it into a flat top myself with my hair trimmer, so why can't he?


Thursday, 5 October 2023

Ridiculous British Gas Billing System

 Is anyone else terminally confused by British Gas' electricity billing system?


Here's the blurb from their website:

Your balance is the amount from your last statement plus any recent payments you've made and minus any refunds we've credited back to you. It doesn't include the cost of energy you've used since your last statement. 

For example: Statement balance = £100 

Payments = £50 (This may include payments that are due a few days before they’re received from your bank) 

Refunded payments = £20 

Actual Balance = (£100 + £50) - £20 = £130

How can a balance statement not include how much you've used since the last bill? It's bloody illogical. It's a bit like the Two Ronnies sketch where Corbett answers the last but one question.

Luckily I keep track of my own bills by taking daily readings and applying the tariff, but not everyone does that.


Master Blaster

Been trying to sort out the sandblaster. A while ago a sprayer friend of mine handed me half a dozen glass beads. "Put these in your blaster sand tank and they'll prevent the sand caking," he said. I duly put them in and forgot about them completely.

Anyway, I proceeded to dismantle the sand valve the other day in an attempt to discover what was continually blocking it and, what did I find? A bloody glass bead sat right in the middle of the valve gate, blocking it comprehensively. It fitted the gate so well that I initially thought it was part of the valve.

Emptied the sand tank and sieved the sand to extract all 6 beads, which are about 1/3rd the size of a standard marble.


Actual marbles would have been better, as they would be too large to block the gate valve.

Still keeps blocking though and I think it's the fact I'm using old media that's contaminated with extraneous substances. I follow the advice and start with the sand valve closed, opening it a bit at a time until I get the required volume of sand, but this lasts for no more than a few seconds before it blocks again, necessitating dismantling the bottom sand valve once more. Going to have to throw away the existing blast media and replace it with new.

The Sealey sand blaster needs some redesigning, if you ask me. The sand valve is at the bottom of the tank, which makes it damned difficult to regulate the amount of sand coming through while you're blasting. It could do with some form of remote control at the business end of the sand blasting pipe, or the mixing of air and sand being performed within the blasting nozzle, rather than at the bottom of the sand tank.

I'd really like to use it for sandblasting the interior of the GT6. Why spoil the ship for a ha'porth of tar? It shouldn't take more than a day or blasting (and probably a couple of tonnes of sand....). I dread tackling it with a wire brush on an angle grinder - you just can't get into the crevices and there are more crevices on the inside of an object than the exterior.

The bloody sand gets everywhere - clothes, hair, ears, nose, mouth. I should wear an overall and my sand blasting mask, which looks like a bee keeper's headgear, but it huffs up and I end up not being able to see a thing. I am aware of the problem of silicosis and take a deep breath before blasting (outdoors), but the rebounding sand gets into my beard/moustache and hence into my mouth.

Sand blasting medium is damned expensive and I need to find some cheap, fine sand from somewhere. Builders' sand is quite coarse (and full of nasty things) and kids' play sand, which is indeed fine, is expensive.


Wednesday, 4 October 2023

The Tory Party at Prayer

It has been said that the CoE is the Tory Party at prayer, and there are statistics that show this is indeed the case. 


Britain never developed a tradition of Christian Democracy or a major Christian party because, by the time this happened in Europe, it already had three – Anglican Tory, Nonconformist Liberal and Nonconformist Catholic Labour. Although correlations are perhaps weaker, this is still the case today. 

Self-identifying Anglicans have been more likely to vote Conservative than Labour, the exceptions being in 1966 and 1997. In 2010, they were nearly twice as likely to vote Conservative as Catholics were.

However, one wonders why Anglican Christians vote Conservative at all.

  • Christianity often emphasises the importance of helping the less fortunate and showing compassion for those in need. Policies which focus on social welfare, healthcare, and affordable housing, align closely with these principles of compassion. 
  • Christians who are concerned about economic justice and helping the poor may find policies aimed at reducing income inequality more appealing. 
  • From a Christian perspective, ensuring fair treatment and just wages for workers may be seen as a moral duty. 
  • A publicly funded NHS aligns with Christian values of caring for the sick and vulnerable. 
  • Many Christians see caring for the environment as a religious duty and addressing climate change and promoting green policies may resonate with those who view environmental stewardship as part of their faith. 
  • Some Christians believe in Christ's teachings on welcoming the stranger and providing refuge to the displaced. 
  • Christians who believe in helping those in need globally may find Foreign Aid aligns with their values.

I suppose there is the argument that old style Conservatism does indeed pay some service to Christian values, but the current incarnation of Conservatism is the complete antithesis of the above. They're seeking enemies everywhere, and even inventing some where none exist, in order to appeal to the lowest, common denominator, yet they are riven with splits.

It seems, from the Party Conference, that they're not so much campaigning to win a General Election, as resigned to a disaster and campaigning in front of the 160k Party members for becoming the leader of the rump that's left.


Tuesday, 3 October 2023

Torchy, the Battery Boy

That headline will be lost on many.

I love Lidl, but I'm sick and tired of their Parkside brand constantly changing the spec of their rechargeable batteries.


I thought I'd have one of their cordless LED lights, which uses those stick batteries that are used in Parkside cordless drills. However, I have two Parkside drills, each of which uses a slightly different rechargeable battery, with different chargers - none of which fit the bloody cordless LED light, despite the similarity of shape.

Now, £7.99 for a torch without a battery is a bit ridiculous anyway, so I got a refund. Bastards!


Monday, 2 October 2023

The Doors

No, not Jim Morrison. 

Had a go at one of the doors of the GT6 on Friday.



The original green paint stuck to the metal like nuclear glue. 


Just over an hour of solid wire wheeling to do the outside and around the skin folds.

Still needs a bit of attention to some dents around the door handle, which will require tapping out with a hammer and dolly. 

In surprisingly good condition for 50 years old, and it's the original skin - just a bit of light surface rust, which was treated with Jenolite prior to smoothing with filler and priming.

The other door, the rear valance and the bonnet left to do. I'm still undecided on stripping the interior paint given it will, for the most part, be hidden by trim. I may give the sandblaster one more try on it, but outside of the garage. It seems to blast out either too much sand or nothing.


Sunday, 1 October 2023

Tap and Die

Nothing to do with hitmen, I assure you.

My spot welder has been out of action for a while as the copper electrodes have bitten the dust and I couldn't find any replacements, anywhere.


As you can see, they're lengths of copper with a thread at one end so they can screw into the holders that attach to the arms of the spot rivetter.

I had bought a length of the correct diameter copper rod to try and make my own but, as there was no urgency, I placed it to the back of my mind - especially as I'd never put a thread on anything, except a sewing needle.

Last week I spotted a thread gauge in Lidl and thought; "That'll be handy for determining the thread of quite a few things, especially the copper spot welder electrodes, and I'll be needing that soon for the GT6 rear valance repair section."

Anyway, yesterday I thought I'd have a go, realising I had bought a tap and die set several years ago at Aldi, but had never used it - one of those things you think might come in handy one day, but you don't know when. I determined the thread size with the gauge from Lidl and then spend an hour trying to find my tap and die set. I finally found it in the least likely place in the workshop - in pristine condition.

On opening the set I discovered there was already a thread gauge in it.


So that was a total waste of money at Lidl, but I suppose I can keep the Lidl one in my toolbox for emergency use when needing to measure the thread of bolts with missing nuts.

I proceeded to tap an M6 (that's a technical term, apparently) thread on each end of the copper rod and then cut the ends off.


Very pleased with the result, not being an engineer, but a navigator. This engineering stuff really is easy, much easier than navigation, which is an art (if you're not cheating and using a GPS). Engineering is just logic and brute strength.


I'll probably get all manner of sarky comments from my engineering buddies now.

I also made some smaller ones, about 1cm in length, that I can use in inaccessible spaces where a large arm gap is a hindrance. They don't give much additional wiggle room, but better than nothing.


I really need to invest in different arm shapes, or use bent copper electrodes for narrow spaces - like in the image below.



Saturday, 30 September 2023

That Tree

The chopping down of that tree seems such an extreme action to me that pure vandalism can't possibly be the reason.


When the dust settles, it would not surprise me one bit that the 16 year-old was making a protest. Look at the coverage the act has generated and the number of people discussing it. He may well have sacrificed the tree, and risked a fine or community service (the sentence for a 16 year-old - he would risk jail if 17), to raise people's consciousness about global warming.

If that's the case, I applaud him. Much more effective at generating discussion and awareness than 1,000 slow marches or holding up motorway traffic.

I may be mistaken, but let's see.

It seems the kind of thing Restore Trust would do in order to make way for a fracking site.


Friday, 29 September 2023

Nibbler II

Being in Lidl last Sunday I couldn't help but look at the centre isle tools. What did I see? A single, forlorn, cordless nibbler.

I hummed and aaahed about it and decided not to buy it, but returned the next day and snapped it up before anyone else got it. It looked as if it needed a good home.


And, I must say, I'm very impressed. It's far better than the Sealey air nibbler I bought, which has a habit of jamming in the cut, tends to go all over the show and doesn't leave a tidy edge.


The Parkside nibbler produces a very refined cut and is very controllable, as you can see from the test cuts I made on 1.2mm mild steel. It cut through it like butter. The only negative is that you're limited to the diameter of any circle you may want to cut - very tight bends are troublesome as it jams.

As with all Parkside tools these days, it doesn't come with a battery and you have to buy that separately. Luckily I already had one for my cordless angle grinder and cordless sander.

Some pics of the work on the rear end of the GT6 I mentioned yesterday:



I wasn't 100% happy with the fall angle to the rear edge, so sanded away some of the excess bodyfiller I'd applied previously.


Thursday, 28 September 2023

Gutter Strip

Got the gutter strips mounted, using pop rivets and a smear of silicone on the hidden face to prevent water ingress.



Once fully dry, I used a very thin strip bit of silicone on the join between the strip and the inner face of the door jamb, again to prevent water ingress.

I've spent most of the last 2 weeks beating out small dents on the scuttle and then smoothing them over with filler. Found a huge defect on the rear corner, which required some hacking out of rot, blobbing weld into the holes and grinding down flat. Also rectified a few bits of welding done by the previous owner.

I started to have a go at renovating some ancillary parts, choosing the radiator first, but found that the surround was very badly corroded. Unfortunately it's brazed to the brass radiator top and bottom, which makes it extremely difficult to remove, so it looks like I'll have to add a new or 2nd hand rad to the list of requirements. A replacement is always recommended, as the old one is bound to be filled with gunge. An exchange one is £300, but you can get uprated aluminium ones for £750, and they're a damned sight lighter. 

A bit steep though.